Pedagogy
Find out about the educational activities compatible with the RegulFlex line
Generating a setpoint profile
Learning objectives :
- Identify and implement advanced functions on an industrial controller
- Use the "Graphics" program editor on the Eurotherm 3508 controller
- Generate and validate the correct operation of the setpoint profile in relation to the required specifications
Summary of activities:
- Presentation
- Preparation
- Implementation of the control command
Development of closed-loop gas injection flow and pressure control systems
Learning objectives :
- Identify the components of a current control loop (4-20 mA)
- Draw up the wiring diagram for a closed-loop control loop
- Wire, parameterise and commission a PID control loop
Summary of activities:
- Preparation
- Wiring the flow control loop
- Calibrating the flow transmitter
- Configuring and commissioning the loop
- Calibrating the pressure transmitter
- Direction of action of the regulator
- Configuring and commissioning the loop
- Checking actions
Development of a closed-loop control system
Learning objectives :
- Identify the components of a current control loop (4-20 mA)
- Draw up the wiring diagram for a closed-loop control loop
- Wire, parameterise and commission a PID control loop
Summary of activities:
- Preparation
- Wiring the control loop
- Calibrating the flow transmitter
- Direction of action of the regulator
- Configuring and commissioning the loop
- Checking actions
Development of split-range control
Learning objectives :
- Identify the components of a current control loop (4-20 mA)
- Wiring diagram for a split-range control system
- Wire, parameterise and commission a PID control loop
Temperature measurement using resistance thermometers
Learning objective :
Configure and commission the signal converter using a temperature sensor with resistance variation
Summary of activities:
- Operating principle of a resistance thermometer
- Setting up
- Calculation of calibration points
- Study of the converter
- Configuring the converter
- Calibration check 8
- Industrial implementation
Level measurement by insufflation
Learning objective :
Take a level measurement using a bubbling rod
Summary of activities:
- Measurement principle
- Implementation
- Calculation of calibration points
- Transmitter reference code
- Transmitter characteristics
- Transmitter calibration
- Transmitter connection
- Measurement curve trace
- Study of the influence of pressure drops
Development of a gas/water ratio control system
Learning objectives :
- Identify the components of a current control loop (4-20 mA)
- Draw up the wiring diagram for a gas/water ratio control system
- Wire, parameterise and commission a PID control loop
Summary of activities:
- Preparation
- Wiring the control loop
- Calibrating the fit4-1 flow transmitter
- Calibrating the fit4-2 flow transmitter
- Direction of action of the controller
- Configuring and commissioning the loop
- Checking actions
Level measurement using hydrostatic pressure
Learning objectives :
- Using a relative pressure transmitter
- Taking a level measurement using hydrostatic pressure
Summary of activities:
- Principle of measurement
- Calculation of calibration points
- Transmitter reference code
- Transmitter technical specifications
- Transmitter calibration
- Transmitter connection
- Measurement curve trace